The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
Durable silicon carbide mechanical seal
The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
4 vane high efficiency impeller
The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
Cast iron volute
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
Heavy duty full frame protection
Protects the pump, while offering a convenient tie down location for transport.
Isolation mounted engine and pump
High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Protected by Honda Oil Alert®
Protects the pump by shutting the engine off when low oil is detected.
Large strainer
The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Photos
Highlights
Hillsboro, Oregon
2024
Honda Power
WB30XT3 Base
GX160
57 lb.
Available
15.2"
17.9"
Specifications
2024
Honda Power
WB30XT3
Base
Water
GX160
163cc
2.7"
1.8"
Direct
9.0:1
Priming time: 150 sec @16.4 ft. | Run Time @ Max Discharge: 1.9 hr
Centrifugal, Self-priming
37 psi
Suction port diameter: 3" NPT | Discharge port diameter: 3" NPT | Total head lift: 85 ft. | Suction head lift: 25 ft.
20.1"
15.2"
17.9"
290 gal/min
0.82 gal
57 lb.
Oil Alert: Std | Volute: Rigid Mounted Cast Iron | Impeller: 4 Vane Cast Iron | Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide